Skip to content
← Back to the library

The guide library / EN

Trim a PCM WAV by Start and End Time

The Audio Editor keeps the interval between a start time and an end time in a supported PCM WAV file. Both values refer to seconds in the original recording. Trimming removes audio outside that interval; it does not change playback speed, rearrange clips or remove a section from the middle and join the remaining parts.

Prepare a supported source

Use a 16-bit PCM WAV with one or two channels, a sample rate between 8,000 and 96,000 Hz, a duration of no more than three minutes and a file size of no more than 20 MiB. WAV is a container, so not every file ending in .wav has the PCM format the editor requires. Keep the original before editing.

If your source is MP3 or a supported M4A/MP4 file, first export WAV through the Audio Converter, save it and select it in the editor. That is a manual step. Check the resulting WAV's size before trying to load it: PCM can be larger than the source.

Keep the interval you need

  1. Open the Audio Editor and choose one PCM WAV. The source player and waveform help you identify the section.
  2. Listen to the original and note the first and last wanted moments. Enter them as Start and End in seconds. For example, Start 12.50 and End 27.00 keeps approximately 14.50 seconds from that source.
  3. Leave volume at 100% and both fades at zero for a trim without those additional effects. Check that Start is at least zero, End is greater than Start and End does not exceed the source duration.
  4. Process the edit with an account that has editor access. The file is rendered locally to a new PCM WAV.
  5. Use the result player to check the beginning and end, then download and open the saved file. The source player remains the original; it is not a live preview of every edit setting.

Read timing as an interval

End is the stop position in the source, not the desired output duration. To keep ten seconds starting at fifteen seconds, use Start 15 and End 25. Start 15 and End 10 is invalid. The controls accept hundredths of a second, and rendering rounds boundaries to audio sample positions, so the actual duration can differ slightly from simple decimal subtraction.

Leave a small margin around speech when deciding boundaries. Cutting exactly into a consonant or a waveform peak can sound abrupt. A short fade can soften an edge, but it can also obscure wanted sound. Render and listen after changing timing; the waveform selection alone does not prove that the saved cut is suitable.

Fix an invalid edit or missing result

Check the range first. Start must be earlier than End and both must fit the source. If fades are enabled, their combined length must fit within the kept interval. A range that rounds to no samples is also invalid. Gain must be between 0% and 200%.

Changing a setting clears the previous result, so download a version you need before trying another cut. Signing out, changing accounts or leaving the page can also invalidate a result. Download checks the current editor access again. For a file-format error, obtain a supported PCM WAV rather than merely changing the extension.

The editor exports WAV and provides trimming, gain and fades for this one file. It does not merge recordings or automatically produce MP3. If you need an MP3 delivery copy, download the edited WAV and convert that file separately, subject to the converter's input limits. See gain and fade settings before adding effects.